Teflon tape adhesive YS7010W is using PTFE fabric industrial series as basic material, and coated with silicone pressure adhesive. This tape has good release surface and cost-effective property, widely used in Packaging, polybag sealing, wire and cable insulation, LCD/FPCB/PCB bonding release, laminating of PVC window and so on.

Teflon tape adhesive YS7010W White

Composition of Teflon tape adhesive

The basic material of Teflon adhesive sheet is PTFE coated fiberglass fabric, which has non stick and chemical resistant property. In this case, in order to coat silicone PSA on the back, the PTFE fabric must be treated on one side.

After treated, PTFE fabric will be coated with Silicone PSA by horizontal coating machine, and protected by yellow release liner.

Property of self adhesive PTFE tape

★   Good release(non stick)

Coated with medium level of PTFE, YS7010W has good release property to ensure non stick property.

★   High working temperature

PTFE adhesive tape can continuous working under 260 C degrees.

★   Adhesion can be customized

ESONE can customize the adhesion that customer need, it could be high or less, strong initial or weak initial, easy to peel off or difficult to peel off.

★   Cost effective

With medium PTFE coating, this PTFE tape can show good property with lower cost.

ESONE PTFE Adhesive Tape

Advantages of PTFE adhesive tape industrial series

Packaging and food processing industry has a big quantity demand for the PTFE adhesive tape, and since the working temperature is not high, the working environment is not tough, so the request for the PTFE adhesive tape is not high.

In this case, we offer PTFE industrial adhesive tape for different industry. This tape will offer good property and reasonable cost.

Technical data sheet of Teflon adhesive tape

Click here to download the TDS of Teflon tape adhesive YS7010W-ESONE

PTFE Teflon Adhesive Tape is produced from PTFE impregnated glass fabric that are coated with a high-temperature-resisntant silicone adhesive.

Teflon tape adhesive YS7010W，首发于My Site。

Teflon coated Fiberglass Tape is using PTFE coated fiberglass fabric as basic material, and coated with Silicone pressure sensitive adhesive (PSA) on the back. The PTFE(Teflon)(Polytetrafluoroethylene) coating surface provides excellent release property, and the adhesive side will make sure the stable adhesion in high temperature below 260 degrees.

Teflon coated Fiberglass Tape has a yellow PVC liner on the back, which can protect the adhesive surface and to ease distinction and use.

ESONE can also cut the adhesive tape into any width, making small adhesive tapes for PCB manufacturing(CVL Lamination), heat sealer machines, covering elements, impulse wires and L-Bar sealers.

Teflon coated Fiberglass Tape

Property of PTFE Coated Heat Resistant Tape

Silicone pressure adhesive tape contain non stick PTFE surface and heat resistant adhesive that allow for easy release, superior mechanical strength, long lifetime and dimensional stability.

The properties of PTFE coated tape with silicone PSA is as follows.

★  Excellent dimensional stability and durability in heat.

★  Superior easy mold release property, excellent Non stick

★  operating continuous from -73°C and +260°C

★  Flame resistant

★  High dielectric constant

★  Good mechanical strength

Why use Teflon coated Fiberglass Tape for FPCB manufacturing

FPCB is Flexible printed circuit boards, which is a modern flexible electronic equipment types, using in printer, phones, cameras and home devices. Flex circuit is more smaller, reliable and dynamic than rigid circuit boards

Teflon Adhesive Tape for FPCB manufacturing

ESONE PTFE coated fabrics with or without adhesive is the product of choice for CVL (coverlay) lamination, due to the excellent release property, high dielectric strength and mechanical strength.

Our very smooth, easy release and defect-free PTFE coated fabric, is designed to enable maximum output in highly automatic process and can be also used as releasing layer and in quick lamination.

Product choice of Teflon Adhesive Sheet

1)  PTFE coated fabric with adhesive, original brown

Brown PTFE fabric is the most common tape for Electrical industry, this fabric has high Teflon content for easy release property, with back side coated with Silicone pressure sensitive adhesive or Acrylic adhesive.

Tear Resistant Teflon coated Tape

2) Conductive (Anti-static) Teflon coated Fiberglass Tape 

Black PTFE adhesive tape is made into anti-static by adding carbon into PTFE coating, which is designed for insulating PCB from breakdown.

Anti static heat resistant adhesive tape

3) Custom color Adhesive Backed Teflon Sheet

Teflon Adhesive Sheet can be coated into blue/green/white/red and any other colors, aim to offer a fool-proofing design during the CVL lamination of PCB manufacturing.

In this case, PTFE coated fabric with adhesive will be easily distinguished during production.

Blue PTFE Tape

Specification of high temperature Teflon tape

Teflon coated Fiberglass Tape maintains durability at high speeds and high temperatures while maintaining a long service life. Frequently used in heat sealers, blister formation and form-fill-seal equipment as well as lining of guide rails, chutes and slides. Acrylic adhesive is also available, although silicone adhesive is our standard.

Related TDS of PTFE tape Premium series YS7008AJ-ESONE, YS7013AJ-ESONE, YS7015AJ-ESONE

Related TDS of PTFE tape Industrial series YS7011AJ-ESONE

Related TDS of PTFE tape Anti-static series YS7008BJ-ESONE, YS7011BJ-ESONE

Click here to access Self adhesive Teflon tape Premium Series

Teflon coated Fiberglass Tape For FPCB Manufacturing，首发于My Site。

Heat Resistant Tape is using PTFE coated fiberglass fabric as basic material, and coated with Silicone pressure sensitive adhesive (PSA) on the back.

The PTFE(Teflon)(Polytetrafluoroethylene) coating surface provides excellent release property, and the adhesive side will make sure the stable adhesion in high temperature below 260 degrees.

Heat Resistant Tape has a yellow PVC liner on the back, which can protect the adhesive surface and to ease distinction and use.

Youngsun(ESONE) can also cut the adhesive tape into any width, making small adhesive tapes for heat sealer machines, covering elements, impulse wires and L-Bar sealers.

Heat Resistant Tape

Property of PTFE Coated Heat Resistant Tape

Silicone pressure adhesive tape contain non stick PTFE surface and heat resistant adhesive that allow for easy release, superior mechanical strength, long lifetime and dimensional stability.

The properties of PTFE coated tape with silicone PSA is as follows.

★  Excellent dimensional stability and durability in heat.

★  Superior easy mold release property, excellent Non stick

★  operating continuous from 70°C and +260°C

★  Flame resistant

★  High dielectric constant

★  Good mechanical strength

Advantages of ESONE’s PTFE adhesive tape

Youngsun (ESONE) can customize tape according to the requirements of different applications.

Custom adhesive — Silicone PSA or Acrylic adhesive

Custom color — Color of PTFE fabric can be brown, black, white, red, blue, green and so on.

Custom tensile strength — Tensile strength of adhesive tape can be enhanced for high request applications like wind turbine blades or manufacturing of composite aircraft components

Blue PTFE Tape

Specification of high temperature Teflon tape

Heat Resistant Tape maintains durability at high speeds and high temperatures while maintaining a long service life. Frequently used in heat sealers, blister formation and form-fill-seal equipment as well as lining of guide rails, chutes and slides. Acrylic adhesive is also available, although silicone adhesive is our standard.

Click here to download the TDS of YS7023AJ-ESONE

Click here to access PTFE Adhesive Fabric Premium Series

Heat Resistant Tape YS7023AJ，首发于My Site。

Adhesive Teflon is made of Teflon coated fiberglass tape with a clean release silicone PSA or acrylic adhesive.

The PTFE(Teflon)(Polytetrafluoroethylene) coating will offer non stick surface and easy release property, and the adhesive back will ensure the heat resistant adhesion below 260 degrees.

Adhesive Teflon has a yellow PVC liner on the back, which can protect the adhesive surface and to ease distinction and use.

Any width or length can be cut according to the applications,  such as heat sealer machines, covering elements, impulse wires, L-Bar sealers, Wire wrap insulation and harness protection.

Adhesive Teflon is made of Teflon coated fiberglass tape with a clean release silicone adhesive.

Property of Adhesive Teflon coated fabrics

Self adhesive PTFE tape contain non stick Teflon coated surface and heat resistant adhesive, like silicone PSA or acrylic adhesive, that allow for easy release, superior mechanical strength, long lifetime and dimensional stability.

The properties of PTFE coated tape with silicone PSA is as follows.

★  Excellent dimensional stability and durability in heat.

★  Superior easy mold release property, excellent Non stick

★  operating continuous from 70°C and +260°C

★  Flame resistant

★  High dielectric constant

★  Good mechanical strength

Esone’s Self Adhesive Teflon Tape

Youngsun (ESONE) can customize tapes according to the requirements of different applications.

Custom adhesive — Silicone PSA or Acrylic adhesive

Custom color — Color of PTFE fabric can be brown, black, white, red, blue, green and so on.

Custom tensile strength — Tensile strength of adhesive tape can be enhanced for high request applications like wind turbine blades or manufacturing of composite aircraft components

Custom PTFE Zone Tapes — Esone can offer PTFE Zone Tapes , which has custom sized adhesive strip on both edges, and the center is non adhesive as Free Zone.

PTFE Zone Tapes are available for applications where it is not desirable for adhesive to come in contact with a heating element.

Blue Self Adhesive Teflon Tape

Offering Skived PTFE Film adhesive tapes — Esone also produce Skived PTFE Adhesive Tape , which is pure PTFE film has excellent elongation.

Skived PTFE Film Adhesive Tape

Specification of Teflon coated fiberglass tape

Adhesive Teflon maintains durability at high speeds and high temperatures while maintaining a long service life. Frequently used in heat sealers, blister formation and form-fill-seal equipment as well as lining of guide rails, chutes and slides. Acrylic adhesive is also available, although silicone adhesive is our standard.

Click here to download the TDS of YS7015AJ-ESONE

Adhesive Teflon YS7015AJ，首发于My Site。

Silicone Adhesive Tape coated with PTFE, has anti-stick surface and heat resistant property, the basic construction is woven fiberglass fabric, which gives strong mechanical strength.

This heat resistant and non stick adhesive tape allows for easy release, while making sure good mechanical strength and dimensional stability.

ESONE Silicone adhesive tape is the product of choice where there is a request for continuous and efficient processing, offering superior initial tack, excellent bonding strength and long lasting performance up to 500˚F/260˚C.

Silicone Adhesive Tape has durability and anti-stic properties, which can be used a lot for lining of guide rails, chutes and slides. The basic construction is woven glassfiber fabric, which gives strong strength.

Properties of Silicone adhesive tape

★  Excellent dimensional stability and durability in heat.

★  Superior easy mold release property, excellent Non stick

★  operating continuous from -70°C and +260°C

★  Flame resistant

★  High dielectric constant

★  Good mechanical strength

Regular size for Teflon adhesive tapes

Normal size is 1 meter wide, 30/50/100 meters long per roll, with yellow release liner.

Teflon adhesive tape

Or can be cut into small roll, like 1.2cm, 2.5cm, 5cm, 7.5cm, 10cm wide and so on, 5m, 10m, 30m, 50m per roll.

Teflon Adhesive Sheet

Technical Data Sheet of PTFE adhesive tapes

Click here to download the TDS of YS7011AJ-ESONE

For samples of Silicone Adhesive Tape ,  please feel free to contact us.
Other Width is also available, you can contact us for more information

Note:
Thickness Tolerance mm= ±%5
All technical data are based on average values.

These values are based on test results we believes to be reliable.

Silicone Adhesive Tape YS7011AJ，首发于My Site。

PTFE Teflon Adhesive Tape is using PTFE coated fiberglass fabric as basic material, and coated with Silicone pressure adhesive on the back, after chemical treated PTFE fabric.

Since there is two more process of making PTFE adhesive than PTFE fabric, so the quality of PTFE adhesive, is not only matter the material quality, but also the chemical treating process and coating process.

PTFE Teflon Adhesive Tape

Performance of PTFE adhesive fabric

Silicone pressure adhesive tape contain non stick PTFE surface and heat resistant adhesive that allow for easy release, superior mechanical strength, long lifetime and dimensional stability.

The properties of PTFE coated tape with silicone PSA is as follows.

★  Excellent dimensional stability and durability in heat.

★  Superior easy mold release property, excellent Non stick

★  operating continuous from 70°C and +260°C

★  Flame resistant

★  High dielectric constant

★  Good mechanical strength

Teflon Adhesive Sheet

Technical Data Sheet of PTFE Teflon Adhesive Tape YS7011A

Click here to download TDS of Adhesive Backed Teflon Sheet YS7011A-ESONE

Color available: Dark brown, Light brown, Black, White

For samples of PTFE Teflon Adhesive Tape,  please feel free to contact us.

PTFE mold release tape

PTFE Teflon Adhesive Tape YS7011A，首发于My Site。

Self Adhesive PTFE Tape is made from PTFE Coated Fiberglass Fabric, and coated with silicone pressure adhesive on the back side. This silicone PSA is heat resistant and long lasting, and the yellow textured PVC release liner is applied to the adhesive surface for ease of application.

PTFE coating surface ensure easy release property, it is the product of choice where there is a request for continuous and efficient processing, offering excellent initial tack, superior bonding strength and long lasting performance at high temperatures (up to 500˚F / 260˚C).

self adhesive ptfe tape

Property of PTFE industrial adhesive tape

Silicone pressure adhesive tape contain non stick PTFE surface and heat resistant adhesive that allow for easy release, superior mechanical strength, long lifetime and dimensional stability.

The properties of PTFE coated tape with silicone PSA is as follows.

★  Excellent dimensional stability and durability in heat.

★  Superior easy mold release property, excellent Non stick

★  operating continuous from 70°C and +260°C

★  Flame resistant

★  High dielectric constant

★  Good mechanical strength

PTFE mold release tape

Applications of PTFE coated fabric with adhesive

The main applications including Package (heat-sealing, heat shrink, plastic bag manufacturing), PVC window & door welding, Plastic and polymer processing (laminating, curing, extrusion, casting, vulcanization), Wood processing and laminating, Textile, Electronics (electrical insulation, cable wrapping, FPCB manufacturing), Automotive, Aerospace(Mold release, cable wrapping) and so on.

Technical Data Sheet of Self Adhesive PTFE Tape

Specification of PTFE adhesive tape

The normal size of self adhesive PTFE tape is 1 meter wide, 30m/50m/100m (or yard) long per roll, with yellow release liner for ease of application.

Or can be cut into small adhesive tape, with 12mm, 19mm, 25mm, 50mm, 75mm wide, 5m/10m/30m/50m long per roll, with or without yellow liner.

Teflon adhesive tape

Adhesive Backed Teflon Tape is impregnated with polytetrafluoroethylene(PTFE). For use in a wide variety of applications including sealers, packaging machines, heat platens and hot plates.

PTFE Adhesive Tapes

Esone PTFE Adhesive Packing

Self Adhesive PTFE Tape Industrial Series，首发于My Site。