Products

Double Sided Kapton Tape

Double sided Polyimide Film Adhesive Tape

Double sided Polyimide Film Adhesive Tape, also referred to as double-sided Kapton tape, is made from a 0.025mm(1mil) polyimide film substrate and is coated with imported silicone pressure sensitive adhesive on both sides. With a total thickness of 0.1mm, it features either a double-sided or single-sided composite PET fluorine release liner.

This high-temperature resistant tape offers excellent insulation, wear resistance, and resistance to acids and alkalis. It can withstand temperatures of up to 280℃(536℉) for 30 minutes and can be used continuously at 260℃(500℉).

Double sided Polyimide Film Adhesive Tape (TDS)

Double Sided Kapton Tape is made from polyimide film and coated with silicone pressure sensitive adhesive on both sides.

PDF| 373kb

TDS of Double sided Polyimide Film Adhesive Tape

Polyimide Film Adhesive Tape (TDS)

Polyimide film adhesive tape is made from polyimide film, providing exceptional heat and chemical resistance.

PDF| 520kb

TDS of Polyimide Film Adhesive Tape

Antistatic polyamide film adhesive tape (TDS)

Antistatic polyamide film adhesive tape is manufactured from a polyamide film treated for antistatic properties on both sides.

PDF| 369kb

TDS of Antistatic polyamide film adhesive tape

Double Sided Kapton Tape，首发于。

Products

ESD Kapton Tape

Antistatic polyimide film adhesive tape

Antistatic polyimide film adhesive tape, also known as ESD Kapton Tape, ESD PI Tape, or ESD Polyimide Tape, is manufactured from a polyimide film treated for antistatic properties on both sides. This treatment utilizes proton bombardment technology in a plasma environment, achieving a static index of up to 10^5 without adding any additives or coatings, preserving the film’s original properties. The adhesive used has double the bonding strength compared to regular products.

The tape features a single-sided high-performance silicone pressure-sensitive adhesive. The surface resistance on the back is less than 10^7 ohms, while the coated surface is below 10^9 ohms. The stripping electrostatic voltage is under 50V, ensuring that electronic components remain safe from static discharge during application.

Antistatic polyamide film adhesive tape (TDS)

Antistatic polyamide film adhesive tape is manufactured from a polyamide film treated for antistatic properties on both sides.

PDF| 369kb

TDS of Antistatic polyamide film adhesive tape

Polyimide Film Adhesive Tape (TDS)

Polyimide film adhesive tape is made from polyimide film, providing exceptional heat and chemical resistance.

PDF| 520kb

TDS of Polyimide Film Adhesive Tape

Double sided Polyimide Film Adhesive Tape (TDS)

Double sided Polyimide Film Adhesive Tape is made from polyimide film and coated with silicone pressure sensitive adhesive on both sides.

PDF| 373kb

TDS of Double sided Polyimide Film Adhesive Tape

ESD Kapton Tape，首发于。

Products

FEP Film Adhesive Tape

FEP Film Adhesive Tape/optically clear tape/FEP tape is a Thermal Class H electrical insulation tape made from (fluorinated ethylene propylene) FEP film. It features a high-temperature silicone adhesive rated for temperatures ranging from -73°C to 204°C (-100°F to 400°F). This tape is perfect for applications that require electrical insulation, optical clarity, easy release, and abrasion resistance.

The FEP backing is chemically inert, thin, and conformable, providing excellent weather resistance and stability across a wide temperature range. The silicone adhesive offers outstanding chemical resistance and electrical properties, allowing for clean removal with minimal residue. Additionally, the FEP film has superior anti-stick characteristics, low friction, and strong resistance to punctures, chemicals, and solvents.

Specification of FEP Film Adhesive Tape

Width: Max 635mm (25inches) wide. Any slit width is available

Liner Options: Available with or without a release liner.

Application of optically clear tape

• Coil and transformer Insulation
• Wire harness Identification
• High temperature cable splicing and cable wrapping

FEP Film Adhesive Tape (TDS)

FEP Film Adhesive Tape is a Thermal Class H electrical insulation tape made from FEP (fluorinated ethylene propylene) film.

PDF| 373kb

TDS of FEP Film Adhesive Tape

FEP Film Adhesive Tape，首发于。

Products

PTFE High Modulus Film Adhesive Tapes

PTFE film adhesive tapes are composed of silicone or acrylic adhesives applied to a substrate made from pure skived PTFE film. These tapes feature a low coefficient of friction, high dielectric strength, and excellent flexibility. As a result, they are commonly utilized in applications such as wire and cable wrapping, lithium battery packaging, and heat sealing in the aerospace and oil & gas industries, among others.

Specification of PTFE High Modulus Film Adhesive Tapes

• Color: Orange, red and others
• Width: Max 400mm(15.75 inches), any slit width is available
• Thickness: most popular thickness is 0.10mm

TDS of PTFE High Modulus Film Adhesive Tapes

PTFE High Modulus Film Adhesive Tape is an electrical insulating tape made with a unidirectionally oriented PTFE orange film base. It boasts outstanding electrical properties, a low friction coefficient, and strong resistance to heat and chemicals. This tape is commonly chosen for applications such as heat sealing, heat-resistant masking, and electrical insulation.

PTFE High Modulus Film Adhesive Tapes (TDS)

PTFE High Modulus Film Adhesive Tape is an electrical insulating tape made with a unidirectionally oriented PTFE orange film base.

PDF| 498kb

TDS of PTFE High Modulus Film Adhesive Tapes

PTFE Film Adhesive Tapes with High Elongation (TDS)

ESONE PTFE film adhesive tape has high elongation rate makes it very flexible, enhancing its suitability for various applications.

PDF| 498kb

TDS of PTFE Film Adhesive Tapes with High Elongation

PTFE High Modulus Film Adhesive Tapes，首发于。

Products

PFA Film

PFA Film/PFA Foil

ESONE PFA film is manufactured using a melt extrusion casting process from Perfluoroalkoxy (PFA) polymer resin. This film boasts the highest continuous use temperature of any melt-processable fluoropolymer film, reaching 260°C (500°F). The PFA film provides many of the performance characteristics of PTFE in a clear and transparent format, and it can be heat sealed, thermoformed, welded, metallized, or laminated to various materials.

Advantages of PFA Film

ESONE’s PFA films provide all the benefits of fluorinated films, including:

• Wide Temperature Resistance: Continuous service temperature range from -425 to 500°F (-254 to 260°C), making them suitable for extreme environments.
• High Melt Temperature: Melt temperature range of 572 to 590°F (300 to 310°C) allows for versatile processing options.
• Chemical Inertness: Resistant to virtually all chemicals, ensuring durability and longevity in aggressive environments.
• Outstanding Dielectric Properties: Excellent dielectric performance over a wide range of frequencies and temperatures, ideal for electrical applications.
• High Dielectric Strength: Provides over 6,500 V/mil (260 kV/mm for 25 micron film), ensuring effective insulation and safety in high-voltage applications.
• Optical Clarity: Excellent light transmission and clarity, making them suitable for applications requiring transparency.
• Additive-Free Composition: Free of plasticizers, processing aids, or additives, ensuring a pure material with consistent properties.

These advantages make melt process fluoropolymers ideal for a variety of demanding applications in industries such as aerospace, electronics, and chemical processing.

PFA GP – General Purpose

• Made from 100% virgin premium grade PFA resin with a melt flow index (MFI) range of 1.5 to 2.5.
• PFA GP is the preferred choice for dielectric applications and situations where exceptional visual clarity and perfection are essential.

PFA WF – Welding Film

• Provides significant cost savings of 30% compared to GP grade while retaining all the physical, mechanical, and thermal properties of General Purpose PFA film
• An ideal economical solution for heat sealing, welding, and other melt adhesive applications where high aesthetic standards are not required.

Specification of PFA Film

ESONE offers PFA films with thickness ranging from 0.012 to 0.25mm (12 to 250 um) (0.0005 inches to 0.010 inches), with a standard width of up to 1,600 mm (63 inches). Additionally, slit widths and bondable surfaces (plasma treated or chemically etched) are available upon request.

Width: Max 1,600mm (63 inches) Any slit width is available

Surface: Non-treatment, plasma treated or chemically etched

Temperature: Continuously working in temperatures ranging from -254°C to 260°C (-425 to 500°F )

Applications of PFA film

PFA foils are widely used across various industries, particularly in environments that require high temperature and chemical resistance. They are suitable for:

• Circuit Board Fabrication: Ideal for reliable performance in electronic applications due to its chemical and thermal resistance.
• Flat Cable Insulation: Provides robust electrical insulation for flat cables in modern devices.
• Electrical Insulation: High-temperature stability makes it suitable for various insulation needs.
• High-Temperature Release Film: Functions effectively in composite manufacturing processes.
• Vacuum Bagging Film: Used in composite applications, withstanding curing temperatures up to 230°C (446°F).

General Properties	Test Method	PFA GP – General Purpose	PFA WF – Welding Film
Specific Gravity		2.15
Area Yield m²/kg/mm (ft²/lb/mil)		727.4(90)
Flammability	UL-94	V-0
Water Absoption %		＜0.01
Standard width mm(in)		Max 1,600mm (63 inches) Any slit width is available
Thickness Available mm(mil)		0.012 to 0.25mm (0.5 to 10 mil)
Color		Clear
Mechanical Properties
Tensile Strength MPa(psi)	ASTM D882	35(5,000)
Elongation at Break %	ASTM D882	500
Tensile Modulus MPa(psi)	ASTM D882	483(70,000)
Initial Tear Strength g/mm(g/mil)	ASTM D1004	9,840(250)
Propagation Tear Strength g/mm(g/mil)	ASTM D1922	1,470(37.5)
Folding Endurance (MIT) cycles	ASTM D2176	100,000
Thermal Properties
Continuous Use Temp ℃(℉)	UL-746B	260(500)
Melt Point ℃(℉)	ASTM D3418	302-310(575-590)
Electrical Properties
Dielectric Strength volts/mm(volts/mil)	ASTM D149	256,000(6,500)	N/A
Dielectric Contant 1kHz	ASTM D150	2.0	N/A
Dissipation Factor 1kHz	ASTM D150	0.0002 – 0.0007	N/A
Optical Properties
Refractive Index	ASTM D542	1.35	N/A
Solar Transmission %	ASTM E424	96	N/A
Surface Treatments Available
Chemical Etching		Available
Plasma Treatment		Available
Applications
Composite Molding Process: Release Films
Chemical Process/Equipment		√	√
Heat Sealing/Welding/Melt Adhesive			√
Electrical/Electronics		√
Medical		√
Optical /Photovoltaics		√
Protective/Decorative		√

Related Document

PFA Film (TDS)

ESONE PFA Fluoropolymer Film is produced from perfluoroalkoxy (PFA) polymer resin and is available in two different grades.

Which are PFA GP – General Purpose and PFA WF – Welding Film

PDF| 450kb

TDS of PFA Film with Two grades

PFA Film，首发于。

Products

UHMW TAPE

UHMW Tape Pressure Sensitive Adhesive Tape/UPE Tape

ESONE’s UHMW tape is made from ultra-high molecular weight polyethylene (UHMH) film with a molecular weight exceeding 9 million, coated with either acrylic pressure-sensitive adhesive or rubber adhesive.

Advantages

ESONE UHMW tape exhibits excellent abrasion resistance and has a low coefficient of friction, making it an ideal protection for surfaces or bearings that experience heavy wear. Additionally, ESONE UPE tape is more economical than PTFE tapes. The high-tack rubber adhesive adheres readily to most dry, clean surfaces, firmly anchoring the product in place, even in the high heat ranges noted in this data sheet.

• Self-lubricating
• Low coefficient of friction
• Powerful adhesive back
• Excellent abrasion resistance
• Superior chemical resistance

Specification

The standard widths for the rolls are 290 mm, 610 mm, and others, with lengths customizable as per requirements. The rolls can be slit to any desired width. This tape is backed with a PE release liner, which protects the adhesive and makes it easy to use.

ESONE also offer balck anti-stait UHMW tape, click here to review.

Applications

ESONE UPE tapes are ideal for creating an abrasion-resistant, anti-stick, and anti-friction surface at temperatures up to 107°C (225°F). They are commonly used to line chutes like spray booth liners, tank or bin liners, flat conveyor guide rails and chutes. Additionally, UHMW film tape is frequently applied to guide rails in glass bottling plants to reduce noise levels. This tape is also effective for replacing desk drawer bearings, ensuring smooth and friction-free drawer movement.

TDS of UHMW Tape Click the model name to download TDS
Model Name	UPE8W	UPE13W	UPE25W	UPE50W
Backing Material	UHMW Film	UHMW Film	UHMW Film	UHMW Film
Adhesive Type	Acrylic	Acrylic	Acrylic	Acrylic
Total Thickness mm(mil)	0.13(5)	0.18(7)	0.30(12)	0.55(21.5)
Basic Thickness mm(mil)	0.08(3)	0.13(5)	0.25(10)	0.50(20)
Adhesion to Steel N/cm(lb/in)	3.8(35)	4.9(45)	5.5(50)	5.5(50)
Tensile Strength N/cm(lb/in)	35(20)	70(40)	140(80)	254(145)
Elongation (% at break)	300	350	425	500
Operating Temperature ℃(℉)	-40 to +107 (-40 to +225)	-40 to +107 (-40 to +225)	-40 to +107 (-40 to +225)	-40 to +107 (-40 to +225)
Colour	Natural	Natural	Natural	Natural
Density(UHMW Film) g/cm³(lb/ft³)	0.96(60)	0.96(60)	0.96(60)	0.96(60)

Related Document

UHMW Tape (TDS)

ESONE UHMW (Ultra High Molecular Weight) polyethylene film coated with sheer resistant pressure sensitive acrylic adhesive, with blue release liner

PDF| 450kb

TDS of UHMW Tape

Black UHMW Tape (TDS)

ESONE Black UHMW (Ultra High Molecular Weight) polyethylene film coated with sheer resistant pressure sensitive acrylic adhesive.

PDF| 450kb

TDS of Black UHMW Tape

UHMW Tape，首发于。

Teflon tape adhesive YS7010W is using PTFE fabric industrial series as basic material, and coated with silicone pressure adhesive. This tape has good release surface and cost-effective property, widely used in Packaging, polybag sealing, wire and cable insulation, LCD/FPCB/PCB bonding release, laminating of PVC window and so on.

Teflon tape adhesive YS7010W White

Composition of Teflon tape adhesive

The basic material of Teflon adhesive sheet is PTFE coated fiberglass fabric, which has non stick and chemical resistant property. In this case, in order to coat silicone PSA on the back, the PTFE fabric must be treated on one side.

After treated, PTFE fabric will be coated with Silicone PSA by horizontal coating machine, and protected by yellow release liner.

Property of self adhesive PTFE tape

★   Good release(non stick)

Coated with medium level of PTFE, YS7010W has good release property to ensure non stick property.

★   High working temperature

PTFE adhesive tape can continuous working under 260 C degrees.

★   Adhesion can be customized

ESONE can customize the adhesion that customer need, it could be high or less, strong initial or weak initial, easy to peel off or difficult to peel off.

★   Cost effective

With medium PTFE coating, this PTFE tape can show good property with lower cost.

ESONE PTFE Adhesive Tape

Advantages of PTFE adhesive tape industrial series

Packaging and food processing industry has a big quantity demand for the PTFE adhesive tape, and since the working temperature is not high, the working environment is not tough, so the request for the PTFE adhesive tape is not high.

In this case, we offer PTFE industrial adhesive tape for different industry. This tape will offer good property and reasonable cost.

Technical data sheet of Teflon adhesive tape

Click here to download the TDS of Teflon tape adhesive YS7010W-ESONE

PTFE Teflon Adhesive Tape is produced from PTFE impregnated glass fabric that are coated with a high-temperature-resisntant silicone adhesive.

Teflon tape adhesive YS7010W，首发于。

High temp Teflon tape is also called as Self adhesive PTFE glass cloth tape. The basic material is high quality E-glass, and coated with high content PTFE (Teflon), after that, PTFE glass cloth was chemical treated on one side, so that the Silicone PSA or Acrylic Adhesive can be bonded on the fabric.

ESONE Teflon coated fiberglass tape is widely used in process like Lamination, Heat-pressing, Vulcanization, Drying, Dyeing or Printing, Insulation and so on. Since our Self Adhesive Teflon Tape has excellent non stick surface and can continuous working below 260 degrees.

High Temp Teflon Tape

Performance of High temp Teflon tape

★  Offering long lasting easy release property

Due to the high PTFE content and the abrasion resistant surface, ESONE Adhesive Backed Teflon Sheet has easy release surface and can offer long lasting non stick property.

★  Continuous working below 260 degrees

PTFE Teflon Adhesive Tape is a heat resistant release sheet, can continuous working below 260 degrees, and offering reliable release property in high temperature.

Tear Resistant Teflon coated Tape

★  High mechanical strength and Dimensional stability

In order for working continuously under high pressure in applications such as lamination, vacuum bagging system, ESONE High temp Teflon tape has high mechanical strength and dimensional stability to resist high pressure in process.

★  Dielectric strength

Teflon coated fiberglass tape has strong dielectric strength, so Teflon tape is widely used in cable wrapping insulation, CCL(copper clad laminate) production, FPCB CVL lamination and so on.

ptfe adhesive tape for packing industry

Application of Self Adhesive Teflon Tape

Aircraft Composites Manufacturing ESONE PTFE coated fabric is used in the manufacturing of composite aircraft components, like mold release tape, vacuum bagging bleeder cloths. Mold release tape is applied directly to the mold, allowing for a clean and easy release surface. And the porous PTFE fabric provides excellent release and is used as breather fabrics, allowing for air and volatiles to escape	PTFE fabric for composite aircraft components
Wind Turbine Blades Release This application also use PTFE porous fabric and PTFE adhesive fabric. We customize PTFE porous fabric with balanced porosity & release property, and has high mechanical strength. For PTFE adhesive fabric, our mold release tape is easy release and has high mechanical strength, so that it can be reused many times easily.	Wind Turbine Blades Release
Automotive Composites Manufacturing -PTFE Release sheet for lightweight plastic/polymer processing like SMC, GMT and RMT. -PTFE Release sheet for lightweight automotive components like front ends, underbody trims, door carrier, parcel shelf and auto seat. -PTFE Release sheet with adhesive for vehicle cord fabric lamination. -PTFE Bleeder cloths and PTFE mold release tape for carbon fiber car hood.	Release sheet for automotive composites manufacturing
Electrical Insulation -Youngsun PTFE coated cloth is used for electrical insulation such as aerospace wire wrapping and electrical coil and phase insulation. -Our PTFE Fabric has excellent mechanical strength, high dielectric constant, strong chemical resistance and heat resistant to 500°F/260°C. -Youngsun PTFE fabrics are also used as linings for the coils of superconducting magnets in order for reducing noise and vibration.	PTFE coated fabric for electrical insulation
FPCB CVL Lamination Youngsun PTFE coated fabrics are used as release liner for CVL (coverlay) lamination or quick lamination, since our material has high mechanical strength and offers excellent release and non-stick property. Excellent smooth, easy release and defect free PTFE fabric will maximum the output in FPCB manufacturing process.	PTFE release sheet for FPCB CVL Lamination
Packaging and Sealing Youngsun PTFE belting is used as conveyor belt to prevent polyethylene film sticking on the surface. Our belt last long, offers quick replace and easy to use. Our belts for food packaging and sealing are available in tear resistant and porous versions for flexible packaging.	Vacuum Sealing Package
Plastic bag manufacturing Plastic bag is heat welded by high speed for sealing, and PTFE coated fabric or PTFE self adhesive fabric is a must use release sheet in this application. Youngsun tear resist fabric or adhesive tape is also available for this application.	PTFE fabric for plastic bag manufacturing
PVC Window and Door welding PTFE coated fiberglass cloth has excellent no stick surface and can resist heat up to 260°C, which can prevent melted PVC from sticking on welding platens. ESONE's product is workable for all kinds of welding process, including RF and microwave systems.	PVC Windows & Doors
Dyeing or Printing Due to the non stick surface of PTFE Adhesive Sheet, ESONE product is used in Dyeing industry, in order for offering heat resistant and non stick surface.	Teflon adhesive tape for Dyeing
Flame Spray Masking Tapes PTFE self adhesive fabric, silicone coated fiberglass, fiberglass adhesive tape is used for plasma flame spray masking application, due to the heat resistant property. Various color is available, and any width can be cut.	Flame Spray Tapes

Technical Data sheet of YS7008AJ

Click here to download YS7008AJ-ESONE

For samples of High temp Teflon tape,  please feel free to contact us.Other Width is also available, you can contact us for more information

Note: Thickness Tolerance mm= ±%5

High temp Teflon tape YS7008AJ，首发于。

Silicone Adhesive Tape coated with PTFE, has anti-stick surface and heat resistant property, the basic construction is woven fiberglass fabric, which gives strong mechanical strength.

This heat resistant and non stick adhesive tape allows for easy release, while making sure good mechanical strength and dimensional stability.

ESONE Silicone adhesive tape is the product of choice where there is a request for continuous and efficient processing, offering superior initial tack, excellent bonding strength and long lasting performance up to 500˚F/260˚C.

Silicone Adhesive Tape has durability and anti-stic properties, which can be used a lot for lining of guide rails, chutes and slides. The basic construction is woven glassfiber fabric, which gives strong strength.

Properties of Silicone adhesive tape

★  Excellent dimensional stability and durability in heat.

★  Superior easy mold release property, excellent Non stick

★  operating continuous from -70°C and +260°C

★  Flame resistant

★  High dielectric constant

★  Good mechanical strength

Regular size for Teflon adhesive tapes

Normal size is 1 meter wide, 30/50/100 meters long per roll, with yellow release liner.

Teflon adhesive tape

Or can be cut into small roll, like 1.2cm, 2.5cm, 5cm, 7.5cm, 10cm wide and so on, 5m, 10m, 30m, 50m per roll.

Teflon Adhesive Sheet

Technical Data Sheet of PTFE adhesive tapes

Click here to download the TDS of YS7011AJ-ESONE

For samples of Silicone Adhesive Tape ,  please feel free to contact us.
Other Width is also available, you can contact us for more information

Note:
Thickness Tolerance mm= ±%5
All technical data are based on average values.

These values are based on test results we believes to be reliable.

Silicone Adhesive Tape YS7011AJ，首发于。

Adhesive backed Teflon sheet is widely used in aerospace, automotive, electronic, energy, food processing, packaging, plastic and polymer production, textile, PVC window and so on.

And YS7013AJ is the best selling PTFE adhesive tape, since it can offer great release with reasonable cost, and is workable for almost all kinds of applications.

Adhesive Backed Teflon Sheet

Adhesive Backed Teflon Sheet is a combination of Teflon, fiberglass and silicone PSA, which allows sheet to perform in continuous high temperatures.

Properties of PTFE Teflon Adhesive Tape

★  Easy release and long lasting

With high PTFE content, good mechanical strength and abrasion resistant, ESONE Teflon adhesive sheet has easy release surface and can perform long time.

★  Continuous working below 260 C degrees

Adhesive Backed Teflon Sheet is a heat resistant release fabric, can continuous working below 260 C degrees, and offer reliable release property in high temperature.

Teflon adhesive sheet

★  High mechanical strength

In order for working continuously under high pressure in applications such as lamination, vacuum bagging system, ESONE High temp Teflon tape has high mechanical strength and dimensional stability to resist high pressure in process.

★  Good dielectric strength

Teflon coated fiberglass tape has strong dielectric strength, so Teflon tape is widely used in cable wrapping insulation, CCL(copper clad laminate) production, FPCB CVL lamination and so on.

Technical Data Sheet Teflon adhesive YS7013AJ

Click here to download the TDS of Self Adhesive Teflon Tape YS7013AJ-ESONE

The color can be Dark brown, Light brown, Black or white.

For samples of Adhesive Backed Teflon Sheet,  please feel free to contact us.

PTFE Adhesive Tapes

Adhesive Backed Teflon Sheet YS7013AJ，首发于。