Thermal Insulation Blankets, designed for pipeline thermal insulation and protection
Thermal Insulation Blankets, made of PTFE or Silicone coated fiberglass fabrics, impregnated on both sides or one side. It’s used as the thermal insulation and protection blanket for the valve, pipeline, exchange, pumps, as this fabric is anti-aging, anti-environment, anti-corrosion, non stick and heat resistant. The working temperature of PTFE coated fabric is up to 600F, and the maximum temperature of silicone impregnated fabric is 500F, but silicone fabric is more flexible than PTFE fiberglass fabric.
What is White Thermal Insulation Blankets?
Thermal Insulation blankets are also called as PTFE impregnate(coated) fiberglass fabric, which are used for valves, flanges, freeze and pumps protection.
This insulation blanket can resist heat, chemical and environment(anti-aging), also Flame and UV, the surface is Non-stick, which has very good self-cleaning property, it is the perfect thermal insulation protection for pumps and so on.
Why use Thermal Insulation Jackets?
This Insulation jacket will lower the thermal energy waste greatly, and also protect the equipment from any chemical corrosion.
This Insulation blanket is cost-effective, energy-save, safe, and reusable solution for all thermal purposes, such as pipeline, valves, filters, exchange, pump systems and so on.
This PTFE impregnated fabric is different from normal PTFE fabric, it is much more flexible and get a better dimensional stability and durability.
The fabrics can be single side or double side coated as required. Color can be red, yellow grey, white…etc.
The advantages of PTFE coated fabric for Insulation Blankets.
– Resist flame
– Resist Environment
– Resist Chemical
– Resist UV
– Almost smokeless
– Non-stick surface, good self-cleaning
The Data sheet of White removable insulation jacket
Click on each material to access the data sheet.
Youngsun could make the thermal insulation blankets into Gray, White, Yellow, Black or any other colors.
The PTFE fabric could be coated on one side or both side.
Click the following to access the data sheet of One side or Both side PTFE impregnated Fabric.
For One Side PTFE impregnated Fabric, the weight would be 16.5 oz/sy ± 10%(560 g/m2), and thickness is 0.016″ ± 10% (0.38mm)
For Both side PTFE impregnated Fabric, the weight would be 18 oz/sy ± 10%(650 g/m2), and thickness is 0.018″ ± .001″ (0.40mm)
Application for Thermal insulation jackets
Removable Insulation Jackets are designed for Pumps, pipeline, valves, freeze protection and so on.
Gray, Black or Yellow color could be offered.
Leave A Comment