Heat Resistant Tape, non stick adhesive tape working below 500F degrees.
Heat Resistant Tape is using PTFE coated fiberglass fabric as basic material, and coated with Silicone pressure sensitive adhesive (PSA) on the back.
The PTFE(Teflon)(Polytetrafluoroethylene) coating surface provides excellent release property, and the adhesive side will make sure the stable adhesion in high temperature below 260 degrees.
Heat Resistant Tape has a yellow PVC liner on the back, which can protect the adhesive surface and to ease distinction and use.
Youngsun(ESONE) can also cut the adhesive tape into any width, making small adhesive tapes for heat sealer machines, covering elements, impulse wires and L-Bar sealers.
Property of PTFE Coated Heat Resistant Tape
Silicone pressure adhesive tape contain non stick PTFE surface and heat resistant adhesive that allow for easy release, superior mechanical strength, long lifetime and dimensional stability.
PTFE coated tape with silicone PSA is the best solution for applications, which has requirement for continuous and efficient processing, excellent bonding strength and long lasting performance at high temperatures (up to 500˚F / 260˚C).
The properties of PTFE coated tape with silicone PSA is as follows.
★ Excellent dimensional stability and durability in heat.
★ Superior easy mold release property, excellent Non stick
★ operating continuous from 70°C and +260°C
★ Flame resistant
★ High dielectric constant
★ Good mechanical strength
Advantages of ESONE’s PTFE adhesive tape
Youngsun (ESONE) can customize tape according to the requirements of different applications.
Custom adhesive — Silicone PSA or Acrylic adhesive
Custom color — Color of PTFE fabric can be brown, black, white, red, blue, green and so on.
Custom tensile strength — Tensile strength of adhesive tape can be enhanced for high request applications like wind turbine blades or manufacturing of composite aircraft components
Specification of high temperature Teflon tape
Heat Resistant Tape maintains durability at high speeds and high temperatures while maintaining a long service life. Frequently used in heat sealers, blister formation and form-fill-seal equipment as well as lining of guide rails, chutes and slides. Acrylic adhesive is also available, although silicone adhesive is our standard.
|PTFE GLASS FABRIC SELF ADHESIVE||STANDARD SERIE||SILICONE PSA|
|Standard width |
Please ask for other widths
|1000 mm||39.5 inches|
|0.23 mm||0.0091 inches|
PTFE glass and Silicone PSA
|Coated weight |
|500 g/m²||14.75 oz/yd²|
|420 N/cm Warp||240 lbs/inches Warp|
|360 N/cm Warp||205 lbs/inches Warp|
|Adhesion||5.8 N/cm||52.6 oz/inches|
|Temperature resistance||-73 to +260 °C||-94 to +500 °F|
Click here to download the TDS of YS7023AJ-ESONE
Click here to access PTFE Adhesive Fabric Premium Series