Teflon Welding Belt for Half Cell Welding Machines

////Teflon Welding Belt for Half Cell Welding Machines

Teflon Welding Belt for Half Cell Welding Machines

Teflon Welding Belt is widely used in the Half-cell welding machines, which is Heat-resistant, Anti-static and has long lifetime. Laminated by two layers of PTFE Coated Fiberglass Fabric, this belt has high tensile strength and could work for long time.

Any sizes could be customized, like 200mm*3509mm, 200mm*4400mm, 200mm*6004mm are all hot-selling sizes.

And different kinds of holes on the Teflon Welding Belt could be made, four hours per line or six holes per line etc.

 

Teflon Welding Belt

Teflon Welding Belt is widely used in the Half-cell welding machines, which is Heat-resistant, Anti-static and has long lifetime.

 

Properties:

-Resist heat up to 360 degrees.

-Anti-static, protect the cell.

-Long lifetime.

-Super Non-stick surface.

-Any sizes could be made.

 

Specification:

-0.26mm Thick.

-Normal Size: 200*3509, 200*4400, 200*6008.

-Two, Four, Six holes per line

 

Youngsun’s Teflon Welding Belt always run very straight, could keep working for long time. Compare to Metal welding belts, this belt would save a lot for your cost, and also operate very well.

“”

2 Comments

  1. Juan 2021年3月24日 at pm6:18 - Reply

    What is the lifespan of this belt?

    • Ms. PTFE 2021年3月25日 at pm2:04 - Reply

      Hi Juan, our welding belt has longer lifetime. But the detailed time is based on the running temperature and running way.

Leave A Comment